ACF6000 Series

The ACF6000 Series uses the Coriolis effect as a technique for liquid mass flow measurement.
The ACF6000 can measure most of the liquids; the infrared light sensor makes it easy for you to set parameters & change the display data. The Double-C tube & Double-D Tube make it possible for the meter to be used in most liquid applications.

FEATURES

Can be programmed by infrared light sensor without opening cover

High turndown ratio of flow rate

It comes any flanges such as ANSI, DIN, JIS etc.

Excellent for high pressure application

Simple for installation, commission and maintenance

Self-diagnostic capabilities, cable faults, pipe vibration

High accuracy of +/-0.2% of reading (or +/-0.1% of reading)

With forward / reverse flow rate measurement function

SPECIFICATION

Sensor Type:	Display:
C tube (5-40 mm) / U tube (50-250 mm)	2 lines LCD with illumination
Size:	Flow Rate Unit
15-250 mm (1/2"-10")	g/s, kg/m, kg/hr, t/hr, lb/m, USgal/m (6 Digit)
Flow Range:	Density Unit
0-240 kg/hr~0-2200 t/hr	kg/m³, g/cm³ (6 Digit)
Accuracy:	Totalizer Unit
+/-0.2% +/-ZS of reading (Standard)	g, kg, Ton, L, m³, Nm³, lb, USgal (7 Digit)
+/-0.1% +/-ZS of reading (Optional)	Temperature
Repeatability:	^oC, ^oF (4 Digit)
+/-0.03% +/-ZS of reading	Keypad:
Density Range:	Infrared light Sensor, can be programmed
200-2300 kgf/m³ (0.2-2.3 g/cm³)	without opening the cover
Accuracy	Turndown Ratio:
+/-0.002 g/cm³	20:1
Temperature Range:	Damping:
-40~125 ^oC (Standard)	0.01-1.0 Seconds
-40~250 ^oC (Optional, Remote Only)	Low Flow Cutoff:
Material:	0.0-9.0%
Wetted Parts	Communication:
Stainless Steel 316L	RS485 (Modbus Protocol) (Standard)
Flange	HART Signal (Optional)
Stainless Steel 316L	Current Output:
Sensor Housing	4-20 mA (Isolated)
Stainless Steel 304	Load
Junction Box	Max. 750
Aluminum Alloy (Epoxy Paint)	Output Unit
Process Connection:	Mass / Volume / Density / Temperature
Flange	Pulse (Alarm) Output:
Flange Type:	Open Collector
JIS 10K / JIS 20K / JIS 40K	Rating
ANSI 150# / ANSI 300# / ANSI 600#	3-30 VDC, 50 mA Max.
DIN PN10 / PN16 / PN25 / PN40	Power Supply:
Protection Class:	90-260 VAC, 50/60 Hz or 24 VDC +/-10%
IP67	Power Consumption:
Explosion Proof, Ex d e [ib] IIC T6 (Optional)	30-40 W (Depend on sensor size)
Installation:	Cable Entry:
Compact or Remote	Sensor to Converter-3/4" G
Signal Cable Length:	Signal output / Power supply-M20
10-100 m	Ambient Temperature:
	-40~60 ^oC
	Max. Pressure:
	63 kgf/cm²