| Excitation: | Keypad: |
| DC pulsed | 3 External keys for programming |
| Display: | and display control |
| 3 Lines LCD with illumination | Data Storage: |
| Line 1 | Operation parameters and totalizer |
| 11 Digit totalizer for forward flow | figures are stored by EEPROM for more |
| 11 Digit totalizer for reverse flow | than 10 years |
| 11 Digit totalizer for difference | Low Flow Cutoff: |
| Line 2 | 0-9.9% |
| 5 Digit flowrate / velocity / % / mA / Hz | Damping: |
| Line 3 | 0-99 Seconds |
| Parameter / Query / Clr tot / Query LOG | Density Setting: |
| Alarm, Guidance | 0.1-9.99 g/cm3 |
| Totalizer Unit | Self Diagnosis: |
| T, kg, g, lb, Ston, Lton, m3, L, mL, lgal, gal, | The following error message are |
| mgal, bbl, fr3, a-ft | displayed if failure occurs |
| Time Unit | - Coil failure |
| sec, min, hour, day | - Power failure |
| Measuring Range: | - Overranged output |
| Min. 0-0.15 m/s | - Internal error |
| Max. 0-15 m/s | - Overflow |
| Accuracy: | - Empty pipe |
| +/-0.4% of reading (Velocity>=0.5 m/s) | Cable Entry: |
| +/-0.002 m/s (Velocity<0.5 m/s) | Standard: PG11 Option: 1/2"NPTF |
| Repeatability: | Protection Class: |
| +/-0.1% of reading | IP65 |
| Current Output: | Ambient Temperature: |
| 4-20 mA (Isolated) | -25~65 oC |
| Load | Material: |
Max. 600  | Aluminum Alloy |
| Pulse Output: | Power Supply: |
| Open collector | 90-260 VAC, 50/60 Hz |
| Rating | 24 VDC +/-10% (Option) |
| 3-30 VDC, 20 mA Max. | Power Consumption: |
| Pulse Rate: | 3-17 W (Dependent on sensor size) |
| 1)Scale pulse (mL/Pusle, L/Pulse, Other) | Weight: |
| 2)Frequency: 0-5000 Hz | 1.4 kg |
| Pulse Width: | Mounting: |
| 50% of band width | Wall mounting |
| Alarm: | Bracket on 2" pipe |
| High / Low with open collector output | |
| Rating | |
| 3-30 VDC, 20 mA Max. | |
| Communication: | |
| RS485 (MODBUS Protocol) | |
| HART signal (Compatible) |
|
Three line LCD display Flow Rate / Totalizer
Back to top
Copyright © 2013 | PT.ALIA TEKNIK All Rights Reserved